Supplies Needed

1. Cricut Expression Machine
2. T-shirt
3. Fabric paint
4. Freezer Paper
5. Foam Brush
6. Iron

Steps

1. Pick out the design you want place freezer paper on mat (shiny side up).
2. Position blade in center of paper so you have plenty of room on all 4 sides. Use centerpoint feature so it cuts dead center of where you positioned the blade.
3. Iron freezer paper on t-shirt to the designated area (Shiny side down)
4. Paint t-shirt -If you use heat set fabric paint make sure you iron it before you peel off the freezer paper
5. Once paint is dry peel off freezer paper

Tips

• Prewash the t-shirt so design doesn't warp due to shrinking
• When ironing, make sure all the corners are down
• **Note: This project was used using the Cricut Expression. It used the flip feature, the Cricut Personal Cutter does not have the flip feature. You may still be able to do this project by switching the directions instead of cutting shiny side up in step 1, cut shiny side down. So that you are flipping it yourself.