Skip to content
FAST SHIPPING! Most orders will ship within 1-2 business days of being placed.
Easy 6 Step Pledge Glitter Ornaments

Easy 6 Step Pledge Glitter Ornaments

We posted this tutorial last year and it was so widely popular that we just had to bring it back this holiday season!  Read on to see how to make your own sparkly ornaments in 6 easy steps, see how my ornaments from last year held up after a year in storage and read some ideas on how to take your ornaments to the next level!

1. Gather your supplies.  You will need:
•Pledge Floor Care Wood Floor Finish (it may be BLUE or YELLOW, just make sure it’s wood floor FINISH and not cleaner)
•Clear ornaments (glass or plastic work- you can even use different shaped ornaments)
•Glitter (fine works best)
•Funnel (a piece of paper rolled into a cone shape works well)

2. Remove the ornament cap and squirt about a tablespoon of the Pledge into the ornament.   Swirl the Pledge around and make sure you get a good even coat over the entire inside of the ornament.  Pour any excess Pledge back into the bottle (or discard).

3. Insert your funnel into the top of your ornament and pour in glitter of your choice.  I have found that fine glitter works best.  You will need a few tablespoons and you can always add more if necessary. 

4.  Coat the inside of your ornament with the glitter.  I found turning the ornament around helped to assure coverage, but you can shake the ornament too, just make sure to cover the top of the ornament with a towel and your thumb so you don’t cause a glitter explosion!

5.  Pour the excess glitter back into the container. Tap the sides of the ornament a little to get any loose glitter out.  You don’t want to leave a clump of unstuck glitter in the bottom of your ornament. 

6.  Pop the top back on your ornament!  That’s all it takes!

I created sets of these last year as gifts for friends and family and everyone loved them!  I saved some for myself (of course) and they were so sparkly in our Christmas tree.  They really were so easy and FUN to make that I must resist the urge to make more this year!  I pulled my box of ornaments out yesterday, to see how these beauties survived being stored over the summer, and they are still just as glittery as they were last year!  The Pledge dries on the inside and your glitter is stuck tight- no worries that it will not last, these will stay glittery year after year. 

Want to take your ornaments to the next level (as if they weren’t beautiful enough on their own!)?  How about a fancy ornament hanger using the Wire Wind it tool?  The big swirl pattern is PERFECT for ornaments.  There are so many uses for the Wire Wind It Tool (did you see our blog posts on how to use this tool to make pipe cleaner spiders, and personalized wire hangers?).

You can also monogram or personalize your ornament with some premium Silhouette Vinyl.  Nothing makes a gift more special than having it personalized and it’s so easy to do!  Just cut any letter out and stick it right to the outside of your ornament.  With the glitter on the inside, you don’t have to worry about the vinyl sticking properly!  

You can also use paint to make a cute snowman, like I did with one of my ornaments from last year.  With just a few dots of paint – the possibilities are endless!

I hope you will give this project a try if you did not try it out last year when we first brought it to you! It really is fun, easy and FAST. I created two dozen ornaments in under and hour and they look so high end, people will never know how simple (and really inexpensive) they are to make!

Happy Crafting!


Previous article Cricut EasyPress Mini Project: Baby Bibs


Kylie - December 29, 2019

Why is my glitter dropping

Sura - November 20, 2019

Can you get that from Sydney Australia. What if you used dishwashing liquid

Lee Ann - August 19, 2019

These would be so fun to make with the kids. Thanks for sharing.

Leave a comment

Comments must be approved before appearing

* Required fields