Skip to content
FREE SHIPPING ON ORDERS OVER $99
FREE SHIPPING ON ORDERS OVER $99
How to Color Etched Glass using Rub ‘n Buff Patina

How to Color Etched Glass using Rub ‘n Buff Patina

Yesterday I showed you how to make your own DIY Fizzy Bath Bombs.  Today I want to show you how to make a cute jar for them to go in!

Craft-e-Corner Blog: Celebrate Your Creativity. You can use Rub 'n Buff to color etched glass!


The bath bombs I showed you how to make in yesterdays blog post are a perfect gift for Mother’s Day!  I wanted to make them look cute in the bathroom too, so I decided to make a jar for them to go in.

After a lot of indecision, I chose to keep it simple and etch “{relax}” on the jar.  I designed the file in my Silhouette Studio Software.  I measured my jar and drew a square to fit the front of the jar, then centered the saying in the middle. For anyone interested, the font I chose was Helvetica.  I can’t say I use Helvetica that often, but I do love a good font!  I have my “go to” list of fonts:

 

But Helvetica seemed to fit well for this project.  I know that was an off tangent about fonts, but I think a font can really make or break a project, don’t you?

So back to how to make our jar…

 

Craft-e-Corner Blog: Celebrate your Creativity! Use Rub 'n Buff to color in etched glass- great crafting tip!

 

1. I cut my design out of vinyl using my Silhouette Cameo and then applied the “negative” to the jar.  You want to remove the parts you want etched, in this case, I wanted just the words etched.

Tip: Once I applied the vinyl, I heated it up the entire design with my embossing heat gun.  I always do this step when using vinyl for painting or etching, it helps to adhere the vinyl and seal up the edges to prevent the paint or etching cream from leaking under the stencil.

2. Next I used some Silhouette Etching Cream to etch my words into my jar.  I painted on an even layer of etching cream using an old trusty paint brush.

Tip: Shake your etching cream a lot to ensure it’s mixed well before you use it!

3. After letting the etching cream sit for just one minute (it works fast!), I washed the etching cream off in the sink with a little running water.  You can now peel off the vinyl.

4. Dry your jar well.  You can see the etching without color, but it’s a more subtle look.  At this point I saw that my etching cream didn’t etch evenly in all areas.  I didn’t clean my jar was before etching, which likely caused it to not etch evenly.

Tip: Use rubbing alcohol to clean you surface and remove any finger prints before etching!

5.   Put a very small blob of Rub ‘n Buff on your finger.  Rub ‘n Buff comes in a lot of different colors– I love this stuff!  I used Patina Rub ‘n Buff  and can’t wait to use other colors for different projects.  A little bit goes a long way.  You can use a soft cloth to apply it, but your finger works just as well too.

6. Rub the Rub ‘n Buff into the etching in a circular motion.  Work quickly, and in sections if you have a large project.

7.  Use a soft cloth to wipe away the excess Rub ‘n Buff.  It will come off the glass surface, but stay in the etched areas!  Don’t let it sit for too long or it won’t want to come off.

8.  Fill the jar with bath bombs and give as a gift or display in your bathroom!

 

In the end, my jar came out a little more shabby chic than I had originally planned, but I love the way it turned out!  I’ve made glass etched jars in the past- remember this jar I etched for Breast Cancer Awareness?  I bet the Ruby Rub ‘n Buff would look great on this jar too!

Rub ‘n Buff can be used on all sorts of surfaces, from wood to metal and more.  It’s a wax finish that you can use for antiquing, crafting, decorating…  You just rub it on, then buff it with a soft cloth to make it shine!  This stuff is awesome for updating door knobs, picture frames, lamps, tables, candle sticks- too many places to list!  I just discovered this stuff and love it already!  Check out all the Rub ‘n Buff colors here.

What will you etch on your jar?

Humor me and share if you have a favorite font choice!

Previous article Faux Leather Paper Notebook Cover: Cricut Mixed Media Project

Leave a comment

Comments must be approved before appearing

* Required fields