Easy Snowman Party Treat Favors Using Cricut Vinyl

Easy Snowman Party Treat Favors Using Cricut Vinyl

Head on over to Craft-e-Corner Cricut Community Facebook Group for more inspiration and education!

DIY Snowman Party Favors Using Cricut Vinyl
Add some fun holiday spirit to your classroom parties, work events, or family gatherings with these cute DIY snowman party favors! Using Cricut vinyl, you can easily make adorable snowman-themed treats that will make everyone smile. This project is a great way to mix crafting with making party favors, perfect for sharing some holiday cheer. Whether you're giving them out as treats in class or as gifts to coworkers, follow our simple guide to create personalized snowman designs. Get ready to make your celebrations extra special with these fun snowman goodies, all thanks to your Cricut tools and a little creativity!

Materials:

Directions:

1) Cricut Desgn Space:

Create your cut design in Cricut Design Space. You can either build your design from scratch or go directly to the pre-made project. For this particular project, I'm using designs that are available through your Cricut Access Subscription: 

  • Snowman (#M50586E9E)
  • Hat (#M4D9F3968)

These designs are part of your subscription and can be easily accessed within the Cricut Design Space. Feel free to customize and adjust the designs as needed to fit your project!

DIY Snowman Party Favors Using Cricut Vinyl

2) Cutting and Weeding

To create your project, follow the step-by-step instructions in Cricut Design Space. Begin by cutting out the different elements of your snowman design. For the eyes, mouth, hat, and buttons, use black vinyl. For the snowman's nose, select orange vinyl to give it a vibrant, cheerful touch.

Once you've completed the cutting process, use your Cricut Weeding Tool Kit to carefully remove the excess vinyl from each piece. This step, known as weeding, ensures that only the desired parts of the vinyl remain, allowing you to transfer your design to the cello bag surface.

DIY Snowman Party Favors Using Cricut Vinyl

3) Assembling the Snowman Treats

Place 4 white chocolate-covered cookies or 4 mini powdered doughnuts into a clear plastic cello food bag. Seal the bag using the twist tie, as shown below. Then, position the hat sticker decal on the front of the bag, placing it at the top of the third cookie from the bottom.

DIY Snowman Party Favors Using Cricut Vinyl

To apply the black vinyl dots that make up the snowman's eyes, mouth, and buttons to the cello bag, start by using Cricut Transfer Tape. First, cut a piece of transfer tape slightly larger than the vinyl design. Carefully place the transfer tape over the vinyl dots, ensuring that the design adheres well to the tape.

Next, gently peel the backing off the vinyl, leaving the dots attached to the transfer tape. Align the transfer tape with the cello bag where you want to place the snowman's facial features and buttons. Press the tape firmly onto the bag, smoothing out any bubbles or wrinkles to ensure a clean application.

Once the transfer tape is securely in place, carefully peel it away, leaving the vinyl dots on the cello bag. Make sure all the vinyl elements are properly adhered and adjust as necessary to achieve a neat and precise finish.

DIY Snowman Party Favors Using Cricut Vinyl

To complete the snowman's face, place the orange nose sticker directly beneath the black dot eyes. This final touch will bring your snowman design to life!

DIY Snowman Party Favors Using Cricut Vinyl

To create the snowman's scarf, tie a piece of thin red ribbon around the bag between the second and third cookies. This will add a festive touch and complete the look!

DIY Snowman Party Favors Using Cricut Vinyl

And that's it – you've got your own snowman party favors, ready to spread some cheer at any event! With just a few simple supplies and your Cricut tools, you’ve turned regular cookies or doughnuts into cute, festive treats. These snowman favors are perfect for holiday parties, classroom fun, or as sweet gifts for coworkers. By following these steps, you’ve made something fun and personal for the holidays. Enjoy the process, and be sure to share your snowman creations with friends and family – there's nothing like a little homemade cheer to make the season brighter!

DIY Snowman Party Favors Using Cricut Vinyl

Looking for more easy-to-craft treat ideas for your next party?

Check out these additional treat projects from our Cricut Design Team for festive celebrations throughout the year!

Safari Animal Valentine Treat Cards

Draw & Cut With Your Cricut – DIY Valentines

St. Patrick's Day Leprechaun Treat Boxes

Leprechaun Treat Boxes for St. Patrick's Day

Butterfly Lollipop Treats

DIY Butterfly Sucker Holder Birthday Favor with Cricut

Halloween Monster Treat Bags

Halloween Monster Treat Bags using Your Cricut

Thankful for You Treat Cards

Personalized DIY Cricut Thank You Card

FEATURED SALES

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.